News

News Center

Current location: home page > News Center > Enterprise Dynamics

How to distinguish the materials of three proof lamps in Shenyang Project

2022-09-13 09:52:07
second

Shenyang Engineering Three proof Lamp It is generally used for the places required for industrial production lighting fixtures with strong corrosion, more dust and rain, such as power plants, steel, petrochemical, ships, exhibition halls, underground parking lots, villa basements, etc. In that case, it is required to specify that the materials of the three proof lamps should be very good. The following section will show you how to distinguish the materials of the three proof lamps.

1: There is no national test report;

2: Look at the product packaging, including the logo of the product's trademark, the allowable output power, and the contents of the logo. Wipe with a soft wet cloth, and the clear and readable mark should be qualified;

3: The qualified LED energy-saving lamp can be used normally for 5000 hours under the test condition, and can be used for more than 2000 hours. If the standard is not met, it is called green lemon;

4: Safety regulations, installation and deletion of the whole process, whether the client program cap is loose, whether there is a crooked neck, whether it is an insulating layer

Optional: In general, attention should be paid to: 1. These products are strongly recommended according to safety verification and national energy-saving lighting engineering projects, not three products; 2. When looking at the inspection, it must be noted that the lamp and the housing are loose, the phosphor is symmetrical, and the thickness of the lamp cannot be changed too much when there are particles or not. Good products should also be properly applied to increase their service life. The manufacturer should ensure that all safety protection and safety are in compliance. Just prepare in advance to achieve a certain level. The life expectancy exceeds 8000 hours. Before the problem of identification, there is a certain quality assurance. The performance parameters of electronic ballast shall also be considered.  

The content of this article comes from the network. If you have any questions, please contact me to delete it!


 Shenyang Engineering Three proof Lamp

Recent browsing:

Service telephone:

024-25815838

Contact: Manager Ding

Tel: 15940588108

Tel: 13840299370

Service hotline: 024-25815838

Fax: 024-25815007

Address: No. 1105, Zhangshi Lantern City, Tiexi Economic Development Zone, Shenyang

Case presentation +