Whether new or rebuilt industrial or civil buildings, they shall be installed according to fire protection requirements Shenyang emergency fire lighting 。 As a part of evacuation indication system, emergency lighting plays a very important role. It can be used by people in emergency. Provide lighting for evacuation. Are there any regulations on the installation position of emergency lights?

1. Installation position of evacuation passage

For general multi-storey or high-rise buildings, when emergency lighting is installed on each floor, it should be installed at the door from the evacuation staircase to the lobby or the smoke proof staircase. In addition, the disabled signs shall also be set up at the barrier free exits on the ground floor of the building and the fire protection of each floor of the elevator entrance. In addition, emergency lighting shall be provided for the evacuation passageway on each floor, and the lamps shall be installed on the top of the ceiling. The lamp at the bottom edge shall be two meters, and two and a half meters. If it is installed at the side of the evacuation aisle, the bottom edge of the emergency lamp shall be less than 1 meter from the ground on the wall.

2. Indicate the installation position of the outlet

The purpose of installing emergency lights at emergency exits is to illuminate and indicate exits. In order to play a better role, the emergency light should be installed inside the exit door, and the sign surface should face the evacuation passage of the floor, or installed in the center above the exit door or beside the door.

3. Installation position of civil air defense works

Civil air defense works and emergency lighting floor nature reserves should be installed at the top of the emergency exits and evacuation passages and corners. Each emergency lighting should be installed at a distance of 10 meters from the evacuation passage, and should be installed on a wall 1 meter from the ground.

As the emergency lighting is the lighting equipment used in emergency, different buildings and installation sites have different requirements in different places. In order to make the emergency lighting fully play its due role, when designing the installer, it is necessary to select a replacement installation location according to the specified requirements.

The content of this article comes from the network. If you have any questions, please contact me to delete it!