Shenyang emergency fire lighting It has infiltrated into all aspects of our lives, and its value far exceeds the product itself. Fire emergency lighting is a fire emergency lamp that provides lighting for personnel evacuation and fire fighting operations. It provides lighting for personnel evacuation and fire fighting operations after power failure in case of sudden and accidental power failure, Therefore, fire emergency lighting fixtures bring great convenience to our daily life. However, there are always shoddy and fake products in the market, so how should we distinguish between the true and false lights when we buy and use them?
Qualified emergency fire lighting and evacuation indication Marker lamp Most of the materials are not easy to burn, and each emergency light has a battery and voltage regulator. Once the power is cut off in case of a fire, the emergency light can automatically start to guide people in the dark to escape. Counterfeit emergency lights often use plastic materials. Lighters can be ignited in 10 seconds, and cannot be automatically turned on after power failure. They need manual buttons to start, so they can't work at all. Here are some ways to distinguish between genuine and fake emergency lights.
1. Check the qualification data: before purchase, the type approval certificate and inspection report of the product should be checked. The fire emergency lighting and evacuation indicator lights are type approved products. The seller should provide the corresponding type approval certificate and inspection report, which can be queried on the China Fire Product Information Network, and the products should be pasted with new ID cards. Our left lighting products all have these advantages.
2. All identifications shall be consistent inside and outside: qualified products shall have fire product ID card identification, charging signal lamp, experimental switch button, certificate of conformity, date of manufacture, manufacturer name and relevant technical parameters on the lamp body. The above contents of unqualified products are ambiguous or incomplete. The batteries of the fire emergency lights and evacuation indicator lights are also the main components of some manufacturers that are shoddy and fake. The battery used in the lamp shall be clearly marked with the model, voltage, capacity and other contents, and shall be consistent with the inspection report of the product. If there is no such content or it is inconsistent with the inspection report, it will be regarded as unqualified fire-fighting products.
3. Simple test: the fire emergency lights and evacuation indicator lights shall be able to be put into emergency status immediately after power failure, and the continuous lighting time shall not be less than 90 minutes. Consumers try to buy one first and go back for discharge test. If the emergency time is less than 90 minutes, it is unqualified fire protection product.
The content of this article comes from the network. If you have any questions, please contact me to delete it!
