Shenyang emergency fire lighting Provide evacuation lighting. The installation mode is wall mounted and top embedded. It can guide people to evacuate in case of emergency. The installation methods are wall mounted, hanging and buried.
1. Please read the instructions or sample data carefully before installation and use.
2.15W to 40W fluorescent evacuation lighting fixtures, etc emergency supply The lamp and tube are not included and are provided by the user. 8-12W emergency fluorescent lamp and incandescent lamp.
3. When ordering marker lamps, the name, model, quantity and type of light source must be written down; If additional emergency time is required, it shall be explained.
4. Order Marker lamp The identification plate, quantity, name, model, model and code of the non identification plate shall be clearly written. Please design requirements or provide drawings.
5. When purchasing, pay attention to that the fire emergency lamp is composed of light source, battery (or storage battery), lamp body and electrical components. Emergency lamps using fluorescent lamps and other gas discharge light sources also include converters, ballasts and other devices. We want to buy lamps that meet the requirements of national industry standards.
6. The battery shall be selected in accordance with the following provisions: the discharge time shall not be less than 20 minutes when using incandescent lamps, and not less than 30 minutes when using fluorescent lamps; For emergency lamps that cannot be installed with too large volume, nickel cadmium batteries or lead-acid batteries shall be used. For batteries with relatively long discharge time, open type batteries with large capacity can be used. Electrical components include DC and AC converters, transfer switches for detecting circuit performance, ballasts, etc.
The content of this article comes from the network. If you have any questions, please contact me to delete it!
