1351 1352 1353 N-ZLZD-E18W1351, N-ZLZD-E18W1352, N-ZLZD-E12W1353, N-ZLZD-E12W1354, N-ZLZD-E8W1355, N-ZLZD-E8W1356, integrated T8 glass emergency lamp |
two hundred and twenty-one | M1351 | M1351 (N-ZLZD-E18W1351) T8 1.2m glass lamp/emergency/main power 1/3 slightly bright/full bright infrared human body induction (color temperature: 6500K)/(matching emergency lamp wiring diagram A) |
[Material] Glass tube [Protection grade] IP30 [Installation method] Bracket installation [Rated voltage] AC220V [Main power consumption] 18W [LED light source] High brightness, low power consumption LED [Emergency time] ≥ 90 minutes [Emergency luminous flux] ≥ 70Lm [Sensing mode] Full bright infrared body sensing [Color temperature] 6500K [Battery] 3.2V400mAh lithium battery [Overall dimension (length × width × thickness)] 1200mm [Package quantity] 25 sets | 
|
two hundred and twenty-two | M1351-A | M1351-A (N-ZLZD-E18W1351) T8 1.2m glass lamp/emergency/full bright infrared human body induction (color temperature: 6500K)/(emergency lamp wiring diagram A) |
[Material] Glass tube [Protection grade] IP30 [Installation method] Bracket installation [Rated voltage] AC220V [Main power consumption] 18W [LED light source] High brightness, low power consumption LED [Emergency time] ≥ 90 minutes [Emergency luminous flux] ≥ 70Lm [Sensing mode] Full bright infrared body sensing [Color temperature] 6500K [Battery] 3.2V400mAh lithium battery [Overall dimension (length × width × thickness)] 1200mm [Package quantity] 25 sets | 
|
Integrated T8 glass emergency lamp
Product model:
N-ZLZD-E18W1351 (1.2m)
N-ZLZD-E18W1352 (1.2m)
N-ZLZD-E12W1353 (0.9m)
N-ZLZD-E12W1354 (0.9m)
N-ZLZD-E8W1355 (0.6m)
N-ZLZD-E8W1356 (0.6m)
Lamp parameters:
◆ Executive standard: GB17945-2010
◆ Emergency time: ≥ 90min
◆ Protection grade: IP30
◆ The lamp has two color temperature options
Product features:
● Semi enclosed design to prevent dust and mosquitoes from entering the lamp and affecting the brightness and safety.
● The internal circuit of the lamp is designed to withstand lightning surge, which can effectively avoid damage to the lamp caused by lightning.
● LED drive adopts integrated voltage limiting and constant current circuit design, with higher efficiency and longer service life.
● High quality LED 2835 chip and high thermal conductivity aluminum substrate are used to dissipate heat, so as to ensure that the heat of LED chip can be quickly exported during operation, and ensure LED life, high brightness, low light attenuation, low energy consumption, good color rendering and no radiation.
● The lamp with emergency uses the lithium iron phosphate battery with high safety performance as the standby power supply. At the same time, the microprocessor is used to manage the battery charge and discharge, so as to ensure that the battery will not be overcharged or discharged, and the battery will always work in a stable state.
● Self resetting button, which can manually turn on or off the emergency function.
● Each lamp has independent fire certification and complete specifications.
● The ID card, indicator light and button are in obvious position, which is easy to identify during fire acceptance.
Wiring mode:
Please correspond to the corresponding wiring diagram number in the Function Configuration Table
It is recommended to use the company's single tube/double tube/IP54 protection/three prevention LED bracket, without the need to modify the line
